eccentric bolts question?

[gr8t1hex]

okay the new camber bolts came with two washers with notches in them. I want to know which way these washers go on so all I have to do is take the car in for alignment when when i'm done.

[gr8t1hex]

bye the way all the bolts came in with theses wahers front bolts came in with 2 each and rears with one each. I'd appreciate any help.

[gr8t1hex]

anyone put these camber bolts on their w202? any feedback????

[benzaddict]

These correction bolts are good for minor adjustments to camber and caster. The correction bolt kit with eccentric washers can adjust either way(positive or negative). There are notches in the frame for the tabs on the inside of the washers which determine which direction(positive or negative) the bolt will offset. I assume you lowered your car and are now trying to get rid of as much negative camber as you can. If so you want to push the bottom of the lower control arm in towards the center of the car, so the correction washers will go in the slots that will achieve this. The most you can hope for out of these correction kits is about .4 degrees, usually .3 degrees.