W210 mirrors

[Dr.Drew]

I have read all the posts about doing this conversion they all lead back to the featured story,

anyways this is what i have to work with
forgive me my car is dirty its been raining here for about a week now.

my question is what is the best way to convert these over i would like to either use the square connector on the mirror or possibly the oval one what should i do about that long retangular connector

http://img.photobucket.com/albums/v621/AndrewC280/P1010053.jpg

and the mirror
http://img.photobucket.com/albums/v621/AndrewC280/P1010055.jpg

[JRE320]

Cut the wiring and then tap it on to the new ones.

[Dr.Drew]

with out cutting the wire !!!

[pnsji]

your car is black 040 and your mirror is black opal? Obsidian black?

[Dr.Drew]

the mirrors are used and are blue I paid 200 dollars for them, I will have them painted to match the car 040

heres a picture i am wondering what the wires on that other connector do ?

http://img.photobucket.com/albums/v621/AndrewC280/p1010056.jpg


the black white gray are for adjustment and the brown-red and black aqua are for heat what about the rest ?

here is the parts number for the female pins to match the ones on the w210 mirror some one was looking for the parts number 008-545-55-26 i am looking for the parts number for the 16 pin connector
this is what the dealer came up with

028-545-83-28
032-545-52-28

[Dr.Drew]

I have had pretty good luck so far with the install I ran the blinking wire and took everything apart with out breaking anything, one question is can I use the puddel light as the ground for the mirrors? my car dose not have the light installed but there are some wires tucked in the door its brown.

guess not since its only on when the door is open