Pulley Upgrade, Take 2

[VIP_MBZ]

For those who didn't read the Kleemann Woes thread, I initially purchased an incompatible pulley kit for my C230k. This time I wanted to double check with you all that I'm getting the right thing.

My car is a 2000 model, produced in Dec. 1999. It has touch shift, the stubby antenna on the roof, and all the other 2000-year giveaways. It looks as though I need ASP Racing pulley model no. ASP331320. Now my main question is, since I have a 2000 model, do I need the AFM relocation kit? Furthermore, is an AFPR unit absolutely necessary, or can I safely dyno it as-is and use an Upsolute reprogram?

-Ray

[MrSpace]

I have the same car as you with the ASP pulley

As I told you, if you give me your part number I am willing to trade.

For any kit, you need to relocate the MAS and either change the FPR or have a chip.

Etienne

[VIP_MBZ]

Originally posted by MrSpace
I have the same car as you with the ASP pulley

As I told you, if you give me your part number I am willing to trade.

For any kit, you need to relocate the MAS and either change the FPR or have a chip.

Etienne

I found out that my pulley kit was W203 only, and have since sold it to a W203 owner. Sorry for the confusion (and certainly answers a lot of questions).

From what I've read, I've seen that 2000 model W202's have a different mass air sensor location. Am I wrong?

-Ray

[MrSpace]

for my complete install check out this link:
http://www.bnzsport.com/forums/index.php?showtopic=14033

the dyno numbers are low (I will re-dyno on a roller dyno in a couple of weeks), but the gain is pretty good!

I really suggest you to contact Linh, the kit comes with the plugs, FPR, relocation tube for the MAS, belt, etc.

edit: I see that the pictures aren't showing up, I still have the word file with all pictures in it. It's 3.3MB if your email can take it!

Etienne

[CKlasse]

It's extremely easy to relocate your airmass. I got 30 degree silicon elbow along with 90 degree polished aluminum tubings to do mine.

http://www.budsmuffler.com/ken/slk/slkintake.jpg

[VIP_MBZ]

Wow my engine bay looks completely different from that. My radiator expansion tank is where your windshield washer fluid reservoir is, my a/c reservoir (?) is where your battery is, and my battery is in the trunk.

-Ray

[MrSpace]

your engine bay is like mine

give me your email I'll send you my file

Etienne

[CKlasse]

Sorry, I forgot to mention those are off SLK 230K's engine bay.

[v4xc]

i dont mean to sound retarded, but what exactly does a pulley do for your car.

[MrSpace]

change the speed the supercharger turns..

instead of like 5psi you get more like 10-11

around 20whp gain

Etienne