spring pad Part #??

[jnolte]

Hi clubmembaz


Does any one know the part number for 1995-Early1996 C36AMG #1 Spring pads. I think its W201 part number not w202. THats what J Irwan said.

[JRE320]

Just go to the dealer and tell them what pad# you want.

[joboo]

i believe the front pads #1 8mm are; 201 321 0984
and the rear are: 201 325 0944
hope this helps.

[Alps]

For W202 mid 96-99
Front(W210 part number) :
210 321 01 84 pad#1 5 mm
210 321 02 84 pad#2 9 mm
210 321 03 84 pad#3 13 mm
210 321 04 84 pad#4 17 mm
210 321 05 84 pad#5 21 mm

Rear(W210 part number) :
210 325 01 84 pad#1 5 mm
210 325 02 84 pad#2 9 mm
210 325 03 84 pad#3 13 mm
210 325 04 84 pad#4 17 mm

For W202 94-mid 96
Front(W201 part number) :
201 321 09 84 pad#1 8 mm
201 321 10 84 pad#2 13 mm
201 321 11 84 pad#3 18 mm
210 321 12 84 pad#4 23 mm

Rear(W201 part number) :
201 325 09 44 pad#1 8 mm
201 325 10 44 pad#2 13 mm
201 325 11 44 pad#3 18 mm


The different between W201 and W210 part number is because of the different shape of the spring.

The W201 spring pad has flat surface where W210 spring pad as a grove where the spring will sit.

On the earlier W202 cars the edges of the spring is tappered, that's why they use W201's spring pad which has flat surface..

compliments of J Irwin fwd`d to me by Koolvin

[jnolte]

My Local benz dealership is DUMB!! i ask many times for the #1 w210 spring pads front and rear and i even give them part number. they dont know what i am talking about! anywhere else i can buy them or any body got any extras i can buy??

[J Irwan]

Originally posted by jnolte
My Local benz dealership is DUMB!! i ask many times for the #1 w210 spring pads front and rear and i even give them part number. they dont know what i am talking about! anywhere else i can buy them or any body got any extras i can buy??



when the part guy pull up the spring pad for any C43 on the EPC it should list all the part number with different thickness.

so there is no way , he doesn't know .
Unless he really knows nothing... ;)




Regardz,

[jnolte]

Originally posted by J Irwan
when the part guy pull up the spring pad for any C43 on the EPC it should list all the part number with different thickness.

so there is no way , he doesn't know .
Unless he really knows nothing... ;)




Regardz,

I hate that stealership, barrier mercedes benz!! ahh they dont listen too me, i think its my age...:(

[omegabenz]

There are a lot of online places to get mercedes parts including but not limited to

www.mercedesshop.com
www.buymbparts.com

If you still have trouble, I can get them for you I am willing. Just email me which ones you want.

Austin

[fastmayte]

hey, i got a 95 c220, can the 202's run stock springs without pads? i got #3 pads in the front and just want like a .5 inch drop.

[JRE320]

Originally posted by fastmayte
hey, i got a 95 c220, can the 202's run stock springs without pads? i got #3 pads in the front and just want like a .5 inch drop.

If you are just planning to make .5 drop and you got #3 pads on,
what the difference? :rolleyes: If your running stock springs why
would you run w/o the pads? :rolleyes: Does it make any sense? :rolleyes: :confused:

[fastmayte]

i wanna get a .5 drop to just have equal gaps around the wheel and wheel well. and i wanna keep stock ride and can't modify the car alot due to family issues....thats y i wanna leave the stock setup if possible.