View Full Version : brakes
Devin
07-12-2005, 09:31 AM
does anyone know were i can get Front brake rotors for my 95 c36 in canada, the dealer is asking about 265.00/rotor for the fronts, i have checked all the aftermarket possible and they all tell me its a dealer item or they have no listings at all
Thanks in advance
Devin
Denlasoul
07-12-2005, 09:39 AM
I've seen some on ebay. Check under "Mercedes Rotor"
misterblack
07-12-2005, 11:10 AM
no where!
the fromt rotors you have on your 95 are bigger than the 96 and 97 C36 models.
I searched high and low and found that the front rotors for my 95 C36 are not made aftermarket. I had no choice but to buy them from the dealer. Not even brembo sells the correct size for our car......96 and 97 C36 only.
good luck!
Devin
07-12-2005, 12:12 PM
guess i will have to go that route then, i have checked every manufacture. i guess there isnt enough 95 c36 out there for manufactures to start stocking items for them other then the dealers
just imagine what a complete brake job would cost at the dealer ship
mayagman
07-12-2005, 01:34 PM
Brembo has a stock fitment for this car. It is a solid rotor, but I have mine CnC cross-drilled. Brake temps took a bit of a dive in the 120-0 range.
Sulaco
07-12-2005, 09:30 PM
Originally posted by mayagman
Brake temps took a bit of a dive in the 120-0 range.
rofl
misterblack
07-12-2005, 09:35 PM
95 C36 should have 320mm front rotors (that's what mine has).....brembo only offers 290mm (part#08.7211.10 ) and 288mm (part#09.6845.10).
link to brembo:
http://www.brembo.com/CatalogoBrembo/Templates/SearchGray.aspx?NRMODE=Published&NRORIGINALURL=%2fENG%2fMarket%2fCatalogue%2fSearch Cars%2ehtm%3fidtab%3d0&NRNODEGUID=%7b17D7BCC8-5414-40CA-9D35-30F3CABF4BA3%7d&NRCACHEHINT=NoModifyGuest
KenzBenz
07-12-2005, 09:52 PM
i think i checked before and tire rack sells them for 199 a piece which is better than 265. Yea I think i have to go that route myself.
benzaddict
07-13-2005, 09:27 PM
Front rotors for the '95 C36 are expensive for sure, but not as bad as a C43!! The early C36 rotors also have directional venting and the part numbers are:
202 421 01 12 - Left
202 421 02 12 - Right
I can get them for $199ea plus shipping if you'd like. Shipping might be kind of expensive though because of the weight.
Devin
07-14-2005, 05:34 AM
200 us is about about 240 can plus shiping would prob. cost me a bit more then 265 can $$$
Thanks though !
Devin
VIP_MBZ
07-14-2005, 10:52 AM
Originally posted by benzaddict
Front rotors for the '95 C36 are expensive for sure, but not as bad as a C43!! The early C36 rotors also have directional venting and the part numbers are:
202 421 01 12 - Left
202 421 02 12 - Right
I can get them for $199ea plus shipping if you'd like. Shipping might be kind of expensive though because of the weight.
Are you sure on those part numbers? I was just told that the first one was bad, and the second one was $40, which doesn't sound right either... ?
-Ray
benzaddict
07-14-2005, 11:27 AM
Yes those are the numbers, remember that those rotors are an AMG part so you have to type in WA202 421 01 12, not just the number, otherwise it won't come up as a good number in the EPC.
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.