PDA

View Full Version : c36 suspension job report



gr8t1hex
07-23-2005, 01:53 PM
Well i finally made the time to swap out my lower control arms and ball joints on my 1995 c36. Let me say first it was fairly easy. While I was at it I decided to cut one coil off all springs and switch to number one pads all around. I also installed adjustable rear camber arms. Appearance wise it looks good enough for me. One finger gap in the rear two in the front with no rubbing at all. I was a little concerned about the ride quality but it is better than before. I am very happy it came out so well or I would have spent the cash and bought the vogtland kit. I did the job alone and it took me 6 hours to do. The first side took the longest because I was figuring out what to disassemble. After that it was a piece of cake. Check out my old pics in members gallery and you'll see it used to look like a 4x4. I'll post pics on Monday once the alignment is done. Alignment guy told me it wont be a problem to get it aligned close to or right to mercedes specs.

jnenad16
07-23-2005, 10:30 PM
good job, but I dont think the front will be in the specs since its only adjustable for 1.5degrees from zero in either way, and if you cut one coil off, that about 2-2.5degrees off of alignment. what you can do for the front is what I did, which is expand the control arm bolt holes about an inch both ways so that the bolt can travel in either direction allowing great adjustability.

nenad

gr8t1hex
07-26-2005, 04:49 AM
Okay here are my alignment results

Left front camber -1.0 toe 0.15

Right front camber -.5 toe .20

Left rear camber -1.7 toe .23

Right rear camber -1.7 toe .23

According to the print out and the alignment shop all are within Mercedes spec tolerances. It rides great I got it up t0 135 mph yesterday evening on I-95 north and it was stable and the ride was comfortable. Needless to say i'm happy, today i'll be nice to the guys at work:D

gr8t1hex
07-26-2005, 05:00 AM
Here are some before and after pics..

Before
http://memimage.cardomain.net/member_images/6/web/786000-786999/786993_1.jpg
http://memimage.cardomain.net/member_images/6/web/786000-786999/786993_5.jpg
http://memimage.cardomain.net/member_images/6/web/786000-786999/786993_3.jpg
http://memimage.cardomain.net/member_images/6/web/786000-786999/786993_2.jpg

gr8t1hex
07-26-2005, 05:06 AM
After...

http://memimage.cardomain.net/member_images/6/web/786000-786999/786993_14.jpg
http://memimage.cardomain.net/member_images/6/web/786000-786999/786993_15.jpg
http://memimage.cardomain.net/member_images/6/web/786000-786999/786993_13.jpg
http://memimage.cardomain.net/member_images/6/web/786000-786999/786993_11.jpg