Door pin broke?

[Taplin06]

Today one of my friends thought it would be funny to take my passenger side door pin off of the door and hide it? Not very funny to me though, now I cant get the damn thing back in there? It just drops down inside. I have a 1995 C220 and any help would be appreciated.

Now my passenger side door will forever be unlocked :|

[c280nz]

Ur door wont be unlocked, u never had to push the button down before had to lock it so dont worry. they key does it for you.
Just take off the door trim to fix this.
theres a screw under the door handle cover.
pop the cover off which is behind the actual crome door handle and theres a screw under this, theres also a screw under a little plastic cover just under a plastic cover just above the door storage bin, and the screw by the door locking mechanism.
Then pop the door trim off the three quarters of the way around the door trim, down the front/back along the bottom and then pull it up, the window clips are along the top pull upwards.

i dont know if youll understand that, i prolly wouldnt if i re read that :-)

[Denlasoul]

Also, be sure to pop the panel back into place properly. It's pretty hard to do it and there are alot of those plastic clips. Be gentle too when pulling the panel off as the clips may break.

[SLAMMED_C]

if you really try hard.. you can get the door pin rod to come throught the door panel without removing it.. its a pain in the ass.. and very frusterating.. but can be done!
just use the key or door lock switch (with window open and door close so the door pin rod will drop down)
using an angled pick or very thin screw driver fish around throught he hole and pop it back into place.. then unlock the doors so the rod pops up so you wont loose it again.. screw on the dor pin.
just another alternative from removing the doop panel.