renerodz
11-02-2005, 08:37 AM
Can someone tell me where is K40/7f30 (Fuse 30) on a '00 C280? This should be a fuse or a relay for both rear O2 sensor heater circuit. Cannot find it in any of the fuse/relay boxes, alldata don't provide for a location on this thing.
I continue to get P0141 or P0161 or both simultanously, then the CEL goes away. A few days later any of the 2 codes or both will come back, and go away again. I don't think both of my rear O2 sensors are bad, and I have no performance issues.
I've got the following from alldata, but can't find anywhere this fuse to start with:
Possible cause and remedy1 (for P0141)
1. K40/7f30 (Fuse 30)
2. Cable of O2 sensor heater of component G3/6 (Right O2 sensor, after TWC [KAT])
3. G3/6 (Right O2 sensor, after TWC [KAT])
Possible cause and remedy2 (for P0161)
1. K40/7f30 (Fuse 30)
2. Cable of O2 sensor heater of component G3/5 (Left O2 sensor, after TWC [KAT])
3. G3/5 (Left O2 sensor, after TWC [KAT])
Thanks for any help.
I continue to get P0141 or P0161 or both simultanously, then the CEL goes away. A few days later any of the 2 codes or both will come back, and go away again. I don't think both of my rear O2 sensors are bad, and I have no performance issues.
I've got the following from alldata, but can't find anywhere this fuse to start with:
Possible cause and remedy1 (for P0141)
1. K40/7f30 (Fuse 30)
2. Cable of O2 sensor heater of component G3/6 (Right O2 sensor, after TWC [KAT])
3. G3/6 (Right O2 sensor, after TWC [KAT])
Possible cause and remedy2 (for P0161)
1. K40/7f30 (Fuse 30)
2. Cable of O2 sensor heater of component G3/5 (Left O2 sensor, after TWC [KAT])
3. G3/5 (Left O2 sensor, after TWC [KAT])
Thanks for any help.