Crystal Clear

[djdoughboy]

might be nice for the projector modification...

http://cgi.ebay.com/ebaymotors/Mercedes-C230-W202-CRYSTAL-CLEAR-Headlights-Corners_W0QQcmdZViewItemQQcategoryZ33710QQitemZ801 8119581QQrdZ1



or maybe just for HID and no projector...

[rollinrealbig]

the headlights look nice ... corner lights ... kinna cheap look.

and same with the tail lights. you should just buy those hedlights and they sell better tail lights and corner lights. just my opinion. ;)

[vbrock1137]

Wow, the seller's got 100% positive feedback with great comments.

Sounds like this could be a decent product.

[rollinrealbig]

Originally posted by vbrock1137
Wow, the seller's got 100% positive feedback with great comments.

Sounds like this could be a decent product.

why have u had problems before ?

me - never! even if their FB is like 80%

you just have to read all the details of what your buyin, most ppl dont.

[vbrock1137]

Seems like with over 500 sales there's usually someone that's unhappy.

I have had bad experiences with ebay though. When I bought my Brabus V's this summer the guy packaged them so negligently they were damaged...well the two that UPS didn't loose anyway. After two months and many emails trying to get him to send the claim info to UPS so I could get my money back I handed him over to my attorneys at American Express.

Anyway, the guy was a reputable seller and I've never purchesed anything without reading every word of the auction about 5 times. Shit happens I guess. Don't use UPS by the way.

I also got a set of headlight eyebrows that didn't fit awhile back.

[KenzBenz]

Originally posted by djdoughboy
might be nice for the projector modification...

http://cgi.ebay.com/ebaymotors/Mercedes-C230-W202-CRYSTAL-CLEAR-Headlights-Corners_W0QQcmdZViewItemQQcategoryZ33710QQitemZ801 8119581QQrdZ1



or maybe just for HID and no projector...

you should try it...on my car :D

[rollinrealbig]

Originally posted by vbrock1137
Seems like with over 500 sales there's usually someone that's unhappy.

I have had bad experiences with ebay though. When I bought my Brabus V's this summer the guy packaged them so negligently they were damaged...well the two that UPS didn't loose anyway. After two months and many emails trying to get him to send the claim info to UPS so I could get my money back I handed him over to my attorneys at American Express.

Anyway, the guy was a reputable seller and I've never purchesed anything without reading every word of the auction about 5 times. Shit happens I guess. Don't use UPS by the way.

I also got a set of headlight eyebrows that didn't fit awhile back.

that sucks man !!! well i did have one problem i remembered, i bought one of those pocketbikes, came with a broken tranny, talked to the seller "ok ok ill send out the parts" and that was last year. ended up taking him to court, plus what i did was i talked to the other unhappy buyers and we grouped up against him. hes out of biz and he they made him refund the $500 i payed him and i kept the shitty bike. still sitting in my garage till today ... collecting dust. and my friend bought a full BDkit for his old celica - NEVER BUY FIBERGLASS his came all broke and it wasnt even made right to fit any car so yea. but all the MB parts ive bought - no problems, as long as they are either OEM or if i really know what im buying.

for example - im sure you know the center console of the 202 has the wood piece, dealer = backorder from germany $500 + ship.

Ebay, used great quality = $40 shipped week later i had it on my car! that is huge saving right there!

[ryhi]

those would be HORRIBLE for xenon use if there was no projector retrofit..

[VIP_MBZ]

Originally posted by ryhi
those would be HORRIBLE for xenon use if there was no projector retrofit..

Sorry for threadjack, but speaking of which, I'm trying out the HIDs I had in my Cressida on the 202. You should come by and check it out.

-Ray

[djdoughboy]

Originally posted by ryhi
those would be HORRIBLE for xenon use if there was no projector retrofit..



why

[VIP_MBZ]

Originally posted by djdoughboy
why

Unregulated beam pattern above the cutoff line, just like stock.

-Ray

[J__]

hey! these look just like the ones i got. i bought Eagle Eyes ones. they look the same but i dunno if its the same ones. the ones i got fit PERFECTLY with NO mods watsoever. fit just like OEM. i have to say they look awesome. gives an updated look. my buddy picked them up for me, he imports car parts. but i got mine for $250 usd though. check it out:

http://img.photobucket.com/albums/v317/Blinky2001/clear1.jpg
http://img.photobucket.com/albums/v317/Blinky2001/clear2.jpg
http://img.photobucket.com/albums/v317/Blinky2001/clear3.jpg

[jstrat85]

how many pins do they have? 4 or six?

[jstrat85]

that shit looks hot!! very clean look. im going to order them to! but the only thing im scared of is that i have and hid kit and i think it might melt the housing??? what do you guys think????? is it?

[rollinrealbig]

they fit pretty good!

kinda looks like your lenses are busted out. u kno ... since its clear.

[J__]

the lights have 6 pins (extra ones for vacuum and daytime running lights) my stock ones had 4 pins. they come with the adapter though. u just pluck off the old connecter and put the 4 female ends in the new connecter. real easy. then it plugs right on.

i dont think ur HID will melt them... HID's produce less heat than halogens..

[duggy 911]

can someone tell me the diff between HID and projector head lights.. thx

[jstrat85]

hid is the bulb with a transfomer that produces that blue purple light, very powerful lights. projector are the lights that have a glass looking ball in them.

[djdoughboy]

Originally posted by J__
hey! these look just like the ones i got. i bought Eagle Eyes ones. they look the same but i dunno if its the same ones. the ones i got fit PERFECTLY with NO mods watsoever. fit just like OEM. i have to say they look awesome. gives an updated look. my buddy picked them up for me, he imports car parts. but i got mine for $250 usd though. check it out:

http://img.photobucket.com/albums/v317/Blinky2001/clear1.jpg
http://img.photobucket.com/albums/v317/Blinky2001/clear2.jpg
http://img.photobucket.com/albums/v317/Blinky2001/clear3.jpg


those look fucking bad ass... and as for HID... as long as the bulb has a sheild... like kenz... they would be perfect for HID... better then the stock lens for sure... the stock lens refracts the the light a lot through the lines on the lens... where as with this set up you dont have that... and coupled with a sheild on the bulb the cut off line stays true...


you have any pics of your HIDs ken? id like to see what the sheild on the bulb looks like and how it fits into the housing...

[VIP_MBZ]

I have a shield on my HIDs (Philips Ultinon). It still sucks. Better than stock at least.

-Ray

[jstrat85]

i dont have a sheild on mine and they work great!

[VIP_MBZ]

Originally posted by jstrat85
i dont have a sheild on mine and they work great!

Mine work great too, if by great you mean having plenty of light both above and below any kind of "cutoff" line.

To me they're just a temp fix before doing a projector retrofit.

-Ray

[choppers_rule]

So...does anyone bought from this Katmac Imports?????
Where else can you get those clear headlights??

[jstrat85]

J__
did you put on you head lights? i really want to know when you open you fog lights in the front wich lights light up the ones on the right or the ones on the left ex were the low beam is, is that were the fog lights open up???? can you take a pic and post it with you fog light on??

[J__]

yea i put them on. the fog lights are the ones in the middle. the ones on the outside are H4 (high/low beam). only the new 97+ cclass has the fog lights on the outside with the lowbeams and the high beams on the inside

[jstrat85]

i got my headlights in yesterday i will post pics as soon as im done!

[crsh2]

Originally posted by jstrat85
i got my headlights in yesterday i will post pics as soon as im done! Hey J Can you post some light output as well specially facing the wall at about 25feet.

are you going to change your clear corner to crystal clear?