eibach pro part # for 97 C230

[yonjun]

I just received eibach pro kit I purchased from fellow member.
I opened the box and

2544.001
2544.002

written on the springs.

I searched and found 2544.140 is for my application.

what are .001 / .002 / .140 means?
I thought .001 / .002 indicated fronts and rears.

but why are they differnt from .140? revision number perhaps?

I just wanted to make sure this set is correct set for 97 C230.

[Pagz]

you can relax now;)they are the right ones!
as I also have 001,002 on my Eibach 2544,which is the lower version of the two different eibach springs available for your 230,the other being the 2532.140 which is a 1.2 inch drop all round compared to the 2544's 1.7 front and 1.8 rear...

you'll most likly find 140 to be the number indicating a set(001+002),where as the 001 and 002 indicate the difference in spring.

[hvmercy]

^^^

23K explained it fully.

I have the 2544.140

http://www.imagestation.com/picture/sraid204/p6dcafaa6dae25e52b1dbb048e98ab3f8/ef73dd6f.jpg


good luck.

[yonjun]

thanks for the explanation.
as I thought it's two different revisions.

from 001 and 002, which one's for fronts?

[Pagz]

no problem!,001 is the front;)

[yonjun]

Originally posted by 23K
no problem!,001 is the front;)
thanks

[yonjun]

Originally posted by hvmercy
^^^

23K explained it fully.

I have the 2544.140

http://www.imagestation.com/picture/sraid204/p6dcafaa6dae25e52b1dbb048e98ab3f8/ef73dd6f.jpg


good luck.

Oh,

then my drop will be more than yours.....

hmmmm.