"negative camber"

[slam96c36]

anyone know any website or company where I can purchase a set of CAMBET KIT for the back...just got my computer back and I lost all the favorite website I need to research.

thanks ahead......

[jnenad16]

contact speedybenz. he makes rear camber arms.

nenad

[JDoggery]

Yes, he does, but very hard to get a hold of. If you are able to let me know that I want one too.

[jnolte]

just order one off his site and see, what happens

[slam96c36]

what is his website? I think is easier to order that way then trying to get in touch with him...sound like he's a busy man

[Denlasoul]

Originally posted by slam96c36
what is his website? I think is easier to order that way then trying to get in touch with him...sound like he's a busy man
It's in the description of Suspension Tuning on the main forum page. :)

[Denlasoul]

oops

[c280nz]

if you cannot get a set off him it is possible to make them yourself (or using an engineer/fabricator anyway)

[Nitrogenbalance]

I think HOP (house of power) has camber arms for your ride also. I know I have seen them on CLK's. I'm certain they are a couple $$ more but they are a two piece kit which should allow for less suspension binding.

HOP is a tight shop as I was out their not long ago.....small but very specific with detail, quality, and know how. You should see the vortech S/C system they build.

I've got contact info if needed. Don't put it off for too long.

[slam96c36]

thanks a bunch...if you have their info, hook me up..cause Iam in need of a set asap. BTW I've been trying to reach Speedy for sometime but I guess the guy is hella busy.

[Hotbasco]

Ordered mine from Speedy last Nov. Have not seen anything yet. It turns out my ride does not need the adjustable arms. There is a minor amount of camber that is not adversly affecting the tire wear.

Note: Neither of my 202's need the adjustable arms. Your might not either.

[trymonlam]

so for up to how many degrees of neg camber would abnormal tire wear occur? i contacted speedy a while ago and he said he's got no problem at making some of these.

[c280nz]

less than 2 degrees should be fine for tire wear

[slam96c36]

I lower my car about 2 1/2 " so I know I have some negative there...I just replaced 4 new tires about 2 months ago and saw the problem on the old tires...

[1995c280]

Originally posted by trymonlam
so for up to how many degrees of neg camber would abnormal tire wear occur? i contacted speedy a while ago and he said he's got no problem at making some of these.

my winter tire set is the same size all around so i can rotate and i always check tire pressures like twice a week. the rear of my car has -2.49 (r/r) and -2.51 (l/r) of camber but previous set of tires on my car have always showed even wear and i don't have the camber arms.

with the staggered monoblocks i have now for summer, obviously i can't rotate anymore though!

Jason