Supra turbo in w202?

**mike mac** · 07-03-2007, 04:51 AM

the other day my freind said that the toyota supra also has an inline 6 and they produce or can produce alot of power. and i was wondering if maybe a turbo kite or stock turbo ( if there is one ) will fit....maybe with a few mods or maybe just the idea taken from it for the setup or what not. if anyone knows that would be awesome

**evevevevev** · 04-10-2011, 06:33 AM

hey Glen your downpipe looks huge are they 3.5"?
I am having issue with my downpipe clearance Im trying to fit a 3.5" one but cant find any space.
do you have a vertical shot of your downpipe?
what diff will you be using?

with 2jz and gt35r you should be able to hit 350rwkw without dramas with the right supporting mods and tune.
what ecu are you using?

**Glen75** · 04-10-2011, 11:21 PM

Originally Posted by evevevevev

hey Glen your downpipe looks huge are they 3.5"?
I am having issue with my downpipe clearance Im trying to fit a 3.5" one but cant find any space.
do you have a vertical shot of your downpipe?
what diff will you be using?

with 2jz and gt35r you should be able to hit 350rwkw without dramas with the right supporting mods and tune.
what ecu are you using?

Hi there, yes 3.5" Dump with 3" after the cat convertor.

Diff is factory for now, i have no idea how strong/weak they are. If i have problems, i will probably fit a R200 diff to it.

No vertical shots of the dump yet, but i will in a week or 2 when i remove to ceramic coat.

Yes 400+ RWHP is the plan.

ECU-factory to get it running, then will switch to a Motec to run the fuel/ignition.

**evevevevev** · 04-11-2011, 01:03 AM

keep posting would be interesting to see.
keen to know how did you clear the 3.5" dump as I have a 1jz in my 202 with 2.5" dump and 3.5" right after dump all the way to the back.
been wanting to upgrade the dump as well but it barely fit 2.5" already. (blocked by chassis)

I have been running stock diff for 2years+ it has shown no sign of giving up yet. (with frequent hard driving and launch with 2200rpm stall)
problem is with A341E box and stock diff (which i believe has mid 3's :1 diff ratio) the gear ratios will be freaking long!

**wrenchturner1980** · 04-11-2011, 10:01 AM

Badass! I love engine swaps from different manufacturers. Keep the pics coming.

**Pagz** · 04-12-2011, 12:31 PM

Is that a 4" system to the rear? was that needed? lol

2JZ looks really good in there!!...now get sneaky and make a custom mercedes valve cover^^

**Glen75** · 04-12-2011, 01:08 PM

Originally Posted by Pagz

Is that a 4" system to the rear? was that needed? lol

2JZ looks really good in there!!...now get sneaky and make a custom mercedes valve cover^^

3.5" up to the Cat convertor, and 3" for the rest of the system.

**Pagz** · 04-12-2011, 02:46 PM

Ah ok sorry should have red the thread properly!

have you had it running? looks loud^^

**Glen75** · 04-12-2011, 02:51 PM

Not running yet, probably about 4+weeks away. Shouldn't be too bad, i'll add an extra muffler in the middle if it is too loud.

**evevevevev** · 04-18-2011, 10:39 AM

can you take a vertical shot of your dump showing the clearance?
I really need to know how do you make it with a 3.5" coz i need one.
thanks!

**Glen75** · 05-27-2011, 10:10 PM

Love it when you start and job, and everything falls into place.

Front brembo's mounted 100%, pad wear sensors in/connected, brake lines done! Will bleed them tomorrow.

New Bilsteins fitted also

330*32mm front disks with Factory Merc Brembo's

Plenty of clearance with the factory 18" mono blocks!!

**Pagz** · 05-28-2011, 01:06 PM

Looks good! Nice choice on parts

**horgantrevor** · 05-28-2011, 01:38 PM

looks great any update and keep pictures coming nice to see the details ]

**Glen75** · 06-07-2011, 03:41 AM

**zmatt** · 06-07-2011, 04:33 AM

ooooh nice.

**horgantrevor** · 06-07-2011, 06:46 AM

looking good cant wait to see it finished also could you post a video on you tube on it running

**horgantrevor** · 06-07-2011, 06:55 AM

what gearbox will you run

**Glen75** · 06-08-2011, 01:36 PM

Originally Posted by horgantrevor

what gearbox will you run

Hey, it has a Toyota A340 4 spd auto-hooked up to the factory Merc shifter. Being a daily driver, i decided to stick with an auto rather than manual.

**Pagz** · 06-08-2011, 01:02 PM

Super tidy!...I like it =)

**Pagz** · 06-08-2011, 01:52 PM

Are you able to resinstall the firewall?...venting it somewhere would shed alot of built up heat if you can.

btw that black spray(rough finish like honda covers) you used on the cam cover and plenum looks great,hope to use that on my next project as well!

**Glen75** · 06-08-2011, 02:01 PM

Originally Posted by Pagz

Are you able to resinstall the firewall?...venting it somewhere would shed alot of built up heat if you can.

btw that black spray(rough finish like honda covers) you used on the cam cover and plenum looks great,hope to use that on my next project as well!

Yeah firewall is fedinately going back in. Gets taken to get the TX valve replaced next week and all the AC lines finished, then i can put the firewall and heatshielding back in. Still alot of small jobs to go to finish and neaten it up.

**horgantrevor** · 06-08-2011, 02:08 PM

what are the calipers off(what merc) and did they fit on no brackets looks nice

**horgantrevor** · 06-14-2011, 02:11 AM

Originally Posted by horgantrevor

what are the calipers off(what merc) and did they fit on no brackets looks nice

any update on what they are off

shes looking nice a nice c36 , or c43 body kit would set if off nice

**Glen75** · 06-13-2011, 11:00 PM

Bilsteins are in, and front is lowered, still need to drop the rear. Hope the front will settle approx 10mm lower with time.

**SD202** · 06-14-2011, 03:28 PM

wow beautiful job you did on fabbing up the intake to the OEM box for the turbo looks sick man. i wish we had side markers in the fenders here in the US

Thread: Supra turbo in w202?

Thread Tools

Display

Hybrid View

Supra turbo in w202?

Posting Permissions