Results 1 to 10 of 10

Thread: Part number for MAF sensor on C23K!

  1. #1
    Senior Member
    Join Date
    Aug 2005
    Posts
    155

    Part number for MAF sensor on C23K!

    VIN number is
    WDB2020241F377508.


    Thank you very much for your answer.

  2. #2
    OG Moderator
    Join Date
    Jan 2006
    Posts
    1,058
    Pull your MAF off of your car and read the part number stamped on it. In the US, an M111.975 should have either “280 217 114” or “000 094 09 48” stamped on the side. Not sure if it will be the same for Croatia since emission laws are different.
    1999 C230 Kompressor

  3. #3
    OG Moderator
    Join Date
    Jan 2006
    Posts
    1,058
    BTW, keep your old housing in case you want to do this:

    http://www.club202.com/forums/showth...&highlight=MAF
    1999 C230 Kompressor

  4. #4
    Senior Member
    Join Date
    Aug 2005
    Posts
    155
    Tnx guys!

  5. #5
    Senior Member
    Join Date
    Aug 2005
    Posts
    155
    Originally posted by xvvvz
    Pull your MAF off of your car and read the part number stamped on it. In the US, an M111.975 should have either “280 217 114” or “000 094 09 48” stamped on the side. Not sure if it will be the same for Croatia since emission laws are different.
    000 094 00 48
    0 280 217 100

    Those are the part numbers stamped on mine, with circle connector on it. Local Merc dealer gave me that (above) number too.
    Everywhere on Ebay are numbers you have mentioned, at least for C230 Kompressor engine, with 09 instead of 00 in part number.
    :-/

  6. #6
    OG Moderator
    Join Date
    Jan 2006
    Posts
    1,058
    If you have a round connector, then you do have a different type and should not use the numbers I gave you.
    1999 C230 Kompressor

  7. #7
    Senior Member
    Join Date
    Aug 2005
    Posts
    155
    Originally posted by xvvvz
    If you have a round connector, then you do have a different type and should not use the numbers I gave you.
    Yep!
    Please, look at my engine bay and at the MAF sensor (something is a little bit oily at the bottom of it). Where do you think I should relocate my MAF sensor?




  8. #8
    OG Moderator
    Join Date
    Jan 2006
    Posts
    1,058
    The system is very different once things get near the TB, so I am not sure if there will be any benefit.
    1999 C230 Kompressor

  9. #9
    Senior Member
    Join Date
    Aug 2005
    Posts
    155
    Originally posted by xvvvz
    The system is very different once things get near the TB, so I am not sure if there will be any benefit.
    Hehe, I thought so too.
    Tnx again.

  10. #10
    Senior Member
    Join Date
    Aug 2005
    Posts
    155
    Trouble solved.
    MAF was pretty oily inside, I cleaned it detaily with ABRA CARB & CHOKE cleaner, diagnostic tool showed 0 errors after reset (15 mins battery off) and few miles test drive after that (before that error was number 37 lambda regulation, accorded to BOSCH KTS 550 diagnostic device).

    I am happy now!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •