Results 1 to 6 of 6

Thread: Replacing brake light bulb

  1. #1
    Junior Member
    Join Date
    Nov 2016
    Posts
    3

    Replacing brake light bulb

    Hi

    Does anyone know of a video/guide for replacing the left/right brake light bulb on a W202? I can't seem to pull out the bulb.

    Any help appreciated.
    Last edited by mun5; 11-14-2016 at 02:35 AM.

  2. #2
    Moderator
    Join Date
    Feb 2011
    Location
    Fremont, CA
    Posts
    1,900
    take the whole plate out and turn the bulb you want to replace to pull it out.. should be easy and that you do not need anything else

  3. #3
    Junior Member
    Join Date
    Nov 2016
    Posts
    3
    Quote Originally Posted by wichipong View Post
    take the whole plate out and turn the bulb you want to replace to pull it out.. should be easy and that you do not need anything else
    My manual says to push the bulb in and turn, but it can't be pushed at all. Other bulbs can be pushed in, but not the stop light. Could it be somehow melted/welded?

  4. #4
    Moderator
    Join Date
    Feb 2011
    Location
    Fremont, CA
    Posts
    1,900
    Quote Originally Posted by mun5 View Post
    My manual says to push the bulb in and turn, but it can't be pushed at all. Other bulbs can be pushed in, but not the stop light. Could it be somehow melted/welded?
    it could be the bulb was installed incorrectly...

  5. #5
    I think you need to cut some of the plastic welds in order to get the bulb.

  6. #6
    Junior Member BlownC43's Avatar
    Join Date
    Dec 2013
    Location
    Palmdale, CA
    Posts
    16
    thanks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •