-
I have an Autel Maxiscan MS300 that works just fine to clear DTC codes but I need to clear transmissions codes on my 98 C280 and it is not capable of that so I bought a Autel MD 802. The MD 802 has the capability to clear the code but you can not use just any cheapo ODBII to 38 pin adapter, which I have found out by researching different forums. It needs a specific Autel adapter. From what I have read it needs the Benz-38/DB15 Femaled for Autel DS708 that cable on amazon is $112.99. I haven't purchased that cable yet but I have different cable on order right now, the BENZ-38 Adapter for Autel MaxiSys MS905 MS908 MS906 $ 29.99 on amazon, to see if it will work and if so I will post it here for you. I had tried one of the generic adapters and all that I got was a link error.
Here are a couple of links to some info that I found about a 38 pin adapter for the MD802:
https://pro.autel.com/autelsupport/M...typeName=MD802
https://www.amazon.com/gp/customer-r...d=OES8UFIXMO1F
-
@ezbrown I pretty much came up with the same info as you. I ordered this cable, hasn't arrived yet
http://m.autelsale.com/wholesale/ben...5-femaled.html
I saw the BENZ-38 Adapter for Autel MaxiSys MS905 MS908 MS906 $ 29.99 on amazon too, but I passed on that figuring it wouldn't work. Hopefully it works, you will have saved yourself quite a few bucks
-
I got the cable today and was able to clear my transmission codes. I used this one , BENZ-38 Adapter for Autel MaxiSys MS905 MS908 MS906 SCANNER https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1 and it worked just fine. Cost was $29.99
Last edited by ezbrown; 01-24-2018 at 05:23 PM.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules