MBATF,

The arms or links will be for the rear only. To do the front would require a redesign of the upper control arm and that is just a little too much work.

The rear camber links should allow adjustment of about 4 degrees both positive and negative.

So if your car now sits at a -2.2 degrees camber you would be able to adjust it to zero camber if you wanted.

The rod ends are high quality alloy steel, chrome plated with teflon bearing races to help movement and noise. To get the correct spacing to the stock mounts, stainless steel spacers will be machined to a close tolerance to provide a precision fit.

Jeff