Results 1 to 15 of 15

Thread: High mount stop light

  1. #1
    Senior Member
    Join Date
    Sep 2003
    Posts
    134

    Post High mount stop light

    My high mount stop light (3rd brake light) isn't as bright as it should. I noticed the other W202's had a bright light when they hit the brakes. I cleaned the lens and my rear glass and replaced the bulb. It had a T4W bulb. I went to PEP boys and replaced it with the same T4W bulb but still the dull brightness. Am I using the right bulb?

  2. #2
    Senior Member
    Join Date
    Sep 2003
    Posts
    301
    Tom,

    This is too obvious but is your rear window tinted? Even the
    slightest bit would cause this difference. Even the difference
    between OEM rear glass and aftermarket glass could be enough
    to look different. Otherwise refer to the owners manual for
    proper bulb rather than what was just in there. That's all I know
    about the subject--hope it helps.

  3. #3
    Senior Member
    Join Date
    Sep 2003
    Posts
    134
    My glass is not tinted. Unfortunely, I do not have a manual when I bought the car. I've seached for wattage and found 3 different ones: 4W (which is currently waht I have), dealer says its 5W and Oram/Sylvania has 20W. Would 4W to 5W make a big difference?

    Sorry to ask but what do you guys have in your car? Does it shine bright like our 5W brake lights?

  4. #4
    The Modfather
    Join Date
    Sep 2003
    Location
    Englandshire
    Posts
    287
    Are you sure you havent seen an LED version?

    You said you changed the bulb? the LED version has 12 LED's and is VERY bright

  5. #5
    Moderator hvmercy's Avatar
    Join Date
    Dec 2003
    Posts
    2,092

    what a coincidence

    I just replaced mine today. I bought the replacement
    bulb from the stealership for $10.43.

  6. #6
    Senior Member
    Join Date
    Jan 2006
    Posts
    472
    bringing back an old thread, but better than starting a new one, right? with all that talk about the LED interiors and tails, what about this? is there an LED that fits perfectly?

  7. #7
    rollinrealbig
    Guest
    im thinkin of this -

    I have a spoiler so my 3rd brake light isnt visible much,

    I want to get a VW style light that hangs on the ceiling panal in the back, and then the hole for the OEM one will get covered with new upolstry.

    ill have to make a trip to the yards for a 3rd brake light - they got tons of shit like this and I wont care what car its off of - hey as long as it fits perfectly and works good it will pass with me!

  8. #8
    Senior Member
    Join Date
    Jul 2003
    Posts
    764
    My car is a 1998 and it has STOCK multiple LED 3rd brake light! I think the updated models all have a multiple LED 3rd brake light.


    The garage::.
    C 230 040 Blacked Out
    Mods: 18\" monoblock, koni lowering springs,Debadged,Black headlight inserts,Custom Puddle Lights, Pioneer P6600,Euro Plates,LED interior lighting

  9. #9
    since this a thread for the third brake light, might as well post my woes with mine here -

    it seems that there is a gap developing between the 3rd brake light and the rear windshield, causing a lot of rattling on the rear deck when going over uneven surfaces on the road. i noticed that the rubber "gasket" of the brake light no longer contacts the rear windshield since the rear deck isn't properly seated. without ripping out my rear deck, is there any other way to stop this annoying rattling?
    2006 WRX Limited
    1998 C280

  10. #10
    Senior Member
    Join Date
    Aug 2003
    Posts
    577
    Originally posted by ricerokets4life
    since this a thread for the third brake light, might as well post my woes with mine here -

    it seems that there is a gap developing between the 3rd brake light and the rear windshield, causing a lot of rattling on the rear deck when going over uneven surfaces on the road. i noticed that the rubber "gasket" of the brake light no longer contacts the rear windshield since the rear deck isn't properly seated. without ripping out my rear deck, is there any other way to stop this annoying rattling?
    take out the brake light and the rear shelf, hehe. i know some put something in there to make it touch again.
    1999 C230 Kompressor Sport, 197
    The modding has started. Too many to list. Stay Tuned.

  11. #11
    the ammount of rattle the 3rd brake light makes in my car is incredible, i tried everything to fix it...nuthing works...
    Modified C230, Sprayed Silver Strips, Updated Grill, Tinted all round, Lowered Springs, 17inch Rimms, K&N performance Filter, Performance chip and AMG exhaust Kit, Hella bixenons with Osram Bulbs
    Just in: Pioneer sound system, 2 1000 Watt Subs, 2 Amps, and 1 Head Unit...luvin the BASS



    http://www.cardomain.com/id/abuimad

    If Its 2 (Good) 2 Be True...Then..Its a 202

  12. #12
    In Charge martattack's Avatar
    Join Date
    Jan 2004
    Location
    Kirkland, WA
    Posts
    816
    According to the EPC, 94-95 used a 5 watt bulb, and 1996-1997 used a 21 watt bulb.

    EDIT: Oh damn, this thread is waaayyy old. Well for future searches, there's my information.

    2012 535i
    2005 545i - Retired
    1994 C280 - Retired

  13. #13
    jdoggery, abuimad, boominbenz - not sure if you have a sub in your car anymore (i haven't been here for a while, thats my bad) but i think you could imagine how bad the rattling of the third brake light would be with a sub running
    2006 WRX Limited
    1998 C280

  14. #14
    In Charge martattack's Avatar
    Join Date
    Jan 2004
    Location
    Kirkland, WA
    Posts
    816
    Originally posted by ricerokets4life
    jdoggery, abuimad, boominbenz - not sure if you have a sub in your car anymore (i haven't been here for a while, thats my bad) but i think you could imagine how bad the rattling of the third brake light would be with a sub running
    You're right, it is pretty terrible rattling, however, I had some carpet foam type stuff laying around and padded the hell out of the inside of it. No more rattles! I did the same thing with the rear deck.

    2012 535i
    2005 545i - Retired
    1994 C280 - Retired

  15. #15
    Originally posted by BoominBenz
    You're right, it is pretty terrible rattling, however, I had some carpet foam type stuff laying around and padded the hell out of the inside of it. No more rattles! I did the same thing with the rear deck.
    looks like i have something to do this weekend -_-
    2006 WRX Limited
    1998 C280

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •