Results 1 to 16 of 16

Thread: Crank pulley (harmonic dampner) Part No.

  1. #1
    Senior Member
    Join Date
    Jan 2006
    Posts
    1,260

    Arrow Crank pulley (harmonic dampner) Part No.

    I would like to know the part number of the crankshaft pulley or harmonic dampner for the 200 kompressor AND/OR the 230 kompressor M111 engines (red kompressor logo lid). I think is the pulley that is in the middle, the one with the fan attached to it, I really cant recall anything though, its been quite sometime since I was under the hood. I currently dont have access to my car so I cant see mine. Also feel free to explain better or to correct me as im not toooo sure either. : Please make an effort as im in a bit of a hurry. Thanks.

  2. #2
    Moderator Pagz's Avatar
    Join Date
    Oct 2004
    Location
    New Zealand
    Posts
    3,219
    HI...
    just to clear things up...the crank pully is the big one at the bottom....the pully the fan is attached to is the water pump pully.

    can i ask why you require the pully numbers?,i can supply them for you in about 8 hours from now if you need them.
    >>00 C43 Black w/birch Black. Immaculate
    >>99 C43 Silver w/CLK55 package
    >>99 S202 RED 250TD Daily.
    >>89 2.6 RED w/16vkit. POS
    >>Old Turbo 2.3 History >>Old Turbo 2.3 Video

  3. #3
    Senior Member
    Join Date
    Jan 2006
    Posts
    1,260

    C200 KOMPRESSOR 2.0lt 192HP

    My motor is a ltd edition M111 which was only available in Greece, Italy and Portugal and produces 192hp from 2.0lt, ASP Pulleys werent sure when I contacted them and they wanted the part number to verify if it was the right pulley. They told me to look for the part number of the harmonic dampner (whats that?!). My engine is the same as the 230K when you see it under the hood.

    http://www.club202.com/forums/showth...?threadid=9626

    Its also a M111 so I presume the 230K's appropriate pulley will do the trick. Im not sure if its the hp that are important or the cc's when it comes to pulleys though. I have same hp as the 230K. If all M111 Kompressors have the same pulley then I guess it will fit. May I ask whats you deal? You can PM me ofcourse. Thanks dude.

  4. #4
    Moderator Pagz's Avatar
    Join Date
    Oct 2004
    Location
    New Zealand
    Posts
    3,219
    Ah...i see,you would like to find out if the after market pully for a 230K will suit your 200K.

    I will check the numbers on my old 230k pully and get back to you in about 2 hours.

    Paul
    >>00 C43 Black w/birch Black. Immaculate
    >>99 C43 Silver w/CLK55 package
    >>99 S202 RED 250TD Daily.
    >>89 2.6 RED w/16vkit. POS
    >>Old Turbo 2.3 History >>Old Turbo 2.3 Video

  5. #5
    Moderator Pagz's Avatar
    Join Date
    Oct 2004
    Location
    New Zealand
    Posts
    3,219
    OK,part number for the dual crank pully on my C230K is
    A 111 030 05 03 and has 280-310Hz stamped there also.
    >>00 C43 Black w/birch Black. Immaculate
    >>99 C43 Silver w/CLK55 package
    >>99 S202 RED 250TD Daily.
    >>89 2.6 RED w/16vkit. POS
    >>Old Turbo 2.3 History >>Old Turbo 2.3 Video

  6. #6
    Senior Member
    Join Date
    Jan 2006
    Posts
    1,260
    Oh man you re such a great guy! THANKS A LOT dude, lots of props.

    Anyone with a C200K (1.8lt 163hp - 2.0ltEU 192hp) pretty please with sugar on top, can he/she tell me the same? Got it from a C230K now I need it from the M111 motor I mentioned above. Thank you so much.:bunny:

  7. #7
    Moderator Pagz's Avatar
    Join Date
    Oct 2004
    Location
    New Zealand
    Posts
    3,219
    Hey no worries,anytime man.
    also iv just figured out why my new pully setup has a vibration at 2500RPM...The n/a models crank pully is set to supress vibration in the 320-360Hz,where as the 230K pully has ~280-310Hz.Im fairly sure this is done due to the difference in compression etc,and could also be different in the manual model due to the clutch setup,these Hz values are stampes on the pully...
    you may want to obtain the number from the automatic model as well just to be safe!...
    >>00 C43 Black w/birch Black. Immaculate
    >>99 C43 Silver w/CLK55 package
    >>99 S202 RED 250TD Daily.
    >>89 2.6 RED w/16vkit. POS
    >>Old Turbo 2.3 History >>Old Turbo 2.3 Video

  8. #8
    Senior Member
    Join Date
    Jan 2006
    Posts
    1,260

    Exclamation

    I ll definitely keep that in mind. Its very important. Thanks a lot bro.

  9. #9
    Senior Member
    Join Date
    Mar 2003
    Posts
    639
    Mine is a W202 C200K 192HP

    I've done another search on the pulley, if I well understood it's the bigger one isn'it? Thato one with both of two belts.

    Please confime it.

    I couldn't see any number.

    Please where to look?

    As I can I'll check again

  10. #10
    Senior Member
    Join Date
    Jan 2006
    Posts
    1,260
    Ok I finally found a picture. Can you please tell me which Number (1,2) is the pulley Im after? And then one of you guys with the same engine or the 163hp can tell me the part No.

    I assume is No.1, Im 90% sure so if you want you can look that up. Thanks so much for the effort guys once again.
    Jim
    >> My white Greek merC

  11. #11
    Senior Member
    Join Date
    Mar 2003
    Posts
    639
    ok that's all clear what are the pulleys.

    Now the problem is to identify where are stamped the numbers.

    I'll search again asap

    Marco

  12. #12
    Senior Member
    Join Date
    Jan 2006
    Posts
    1,260
    Originally posted by 23K
    ...and has 280-310Hz stamped there also.
    Make sure you read and post the HZ too. Thanks Marco!

    23K or anyone can you tell me where exactly is the Part No. located on the pulley so it will be easier to look for? Thanks dude.
    Jim
    >> My white Greek merC

  13. #13
    Senior Member
    Join Date
    Jan 2006
    Posts
    1,260
    Anything yet??????????????????????????
    Jim
    >> My white Greek merC

  14. #14
    Senior Member
    Join Date
    Mar 2003
    Posts
    639
    Originally posted by NEA-4311
    Anything yet??????????????????????????
    I've done another look in my engine bay but I confirm I couldn't identify any part number!!

    As said any photo may help me out to find this number!

    Marco

    PS: I was out for over a week since my daughter is just born!!

  15. #15
    Senior Member
    Join Date
    Jan 2006
    Posts
    1,260
    Ah, neverimind! Im flying to Greece tomorrow anyway! CONGRATULATIONS DAD! hahaha! :bunny: :bunny: :bunny: :bunny: :bunny: :bunny: :bunny: :bunny: :bunny: :bunny: :bunny:
    Jim
    >> My white Greek merC

  16. #16
    Senior Member
    Join Date
    Mar 2003
    Posts
    639
    Originally posted by NEA-4311
    Ah, neverimind! Im flying to Greece tomorrow anyway! CONGRATULATIONS DAD! hahaha! :bunny: :bunny: :bunny: :bunny: :bunny: :bunny: :bunny: :bunny: :bunny: :bunny: :bunny:
    thanks a lot thanks!!

    She is 8 days old just today!!



    Marco

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •