lets see what you guys know about adding an alky injection kit to the M111 supercharger.

kits on Ebay run $180. but you can build your own kit and buy the individual parts like Pressure switch and injector nozzel for about $15 bux each. I already have wires and relays laying around and I can use the stock windsheild reservoir for the alcohol. For the pump.. I am thinking of twin junkyard windsheild washer reservoir pumps back to back.

the point in this mod is to reduce the air intake temp. my idea is to set the pressure switch to turn on at anything above 4lbs of boost.

this is a MUST if you are running a pulley. it will help reduce intake air temps and help with running lean. (alcohol helpts with that)

but what I am really wondering is.. if I will see any gains with a stock M45 running stock PSI.


here is a link to the kit on Ebay

http://cgi.ebay.com/ebaymotors/WATER...temZ7969696205


let me know what you guys think