I installed some xenon fog lights I got from eBay. They were for H3 bulbs and 6000K temperature range. It drives me crazy when I see xenon kits installed with the modules either zip tied in or just bouncing around.



I took the xenon module apart and drilled two holes in and put bolts. I put some sealant at the base of the bolts. I had to position the bolts where they're at to fit on the brace I bolted them to in the car.



This is what looks like put back together.



I also drilled holes and put grommets in the bottome of the fogs lights to run the wires through for the xenon bulbs.





Here's what the driver's side looks like finished.



This is the passenger's side.