Sorry for the long post but it's my first here (been lurking for a while now).

Just got a 94 C220 to phase out my 84 190D.

So here's what I've done so far:
Replace old grill with new style / Lighted door sills / Shift gate surround / Take out stupid aftermarket cd head unit and replace.
Install 2 amps and sub and cd changers.

Next up Led tail lights, crystal headlights, brushed aluminum door lock pins and pedals, and then maybe inside the instrument cluster.


Problem I'm having is that the automatic antenna won't lift. No motor noise at all. Checked the wiring (see below). Before you start, I've check the forums and found nothing that fits, but I'm happy to be corrected.

4 pin connector on antenna motor:
pin 1: solid brown - ground
Checked continuity to ground and it's proper.
pin 2: solid blue encased in its own black plastic surround. - something to do with cell phone. If anything is supposed to be on it I don't know -- suggestions?
pin 3: purple and red - +12v constant
Measured voltage and it's proper.
pin 4: blue and white - +12v switched from radio
Checked continuity back to radio and voltage +12v radio on 0V radio off, all are proper.

single pin wire connector on antenna motor to ?antenna amplifier?
blue wire: +12V didn't measure this one yet.

Short of the antenna motor suddenly failing, I'm at a loss here.