Heres a few pics for all that have been following the build...truely a sight for saw eyes given the trouble in the last 12 months!
Here you can see the beautiful bell mouths used inside the plenum...
Heres a few pics of the car since its been so long now...
i like the rear wheels but the fronts are another story,hopfully the stoptech kit will make it look alittle better in that area.
the car is also sitting alittle high given its missing the exhaust,turbo and all liquids...
The turbo is again a top mount to give a nice 4-1 and still have room for the wastegate with plenty of engine movment clearance...we did shift it further back and down after i took this pic...
There is still alot to do in the bay,the new cam cover should be complete this week,and where looking into washer/cam breather combo for the left side,and maybe even a matching coolant tank for the right,as well as the IC piping and intake...
Thanks all,
Paul
>>00 Black C43 w/Birch-Black. Immaculate. SOLD
>>94 Red C36, 6 speed .663 project
>>99 C43 Silver w/CLK55 package
>>99 Red S202 250TD.
>>89 Red 190E Evo1 kit, C36 engine w/.404
>>Old Turbo 2.3 History >>Old Turbo 2.3 Video
Just look at that turbo.....
BTW, I am very ignorant when it comes to engine internals, but shouldnt the manifold have some kind of pattern inside it so it sends air more efficiently to each cylinder? Arent you going to get more pressure on the last one compared to the first?
is it normal if i get turned on by an intake manifold
. WOW fantastic work... I love it keep up the great work.
TOOK THE WORDS RIGHT OUT OF MY MOUTH BROTHA!Originally posted by omeyhomey
is it normal if i get turned on by an intake manifold
paul, i would sell my firsbtorn child to buy this car from you when it's complete.
loooool at the power steering fluid resevoir under the intake. you built the coolant expansion tank from scratch, any plans for that? i can't believe what a beutiful mirror finish they polished out the intake to be. i'm in total shock.
simply one of the best C class's out there.. What kind of front bumper is that?
Omey,PG,
hahaha...must say it was instant creamage when i finally laid hands on her this avo!!!
LOL @ selling your kids
haha that damn power steering resevoir!!!sooo always in the way!!...and sooo hard to shift lol...got the ":Paranoid:" look when i told him to put the TB there...could you imagine how it would have looked if the TB sat to the right of it?...i couldnt so that was that
still trying to decide if we anodiz all the polished parts in a clear finish,or maybe a clear coat...but yeh the polish finish he did is excellent!
as for the custom coolant tank,there is a high chance it will be swapped out for a nice "radiused egde" item...however i may attempt to remove the float switch system from the first unit to install in the new...will see when the bill comes through and if i will have anything left to live on lol
Thanks markland,thats a "Lumma tuning" bumper,made in germany.
>>00 Black C43 w/Birch-Black. Immaculate. SOLD
>>94 Red C36, 6 speed .663 project
>>99 C43 Silver w/CLK55 package
>>99 Red S202 250TD.
>>89 Red 190E Evo1 kit, C36 engine w/.404
>>Old Turbo 2.3 History >>Old Turbo 2.3 Video
Looks oh so hot . . . gonna get a rear kit to finish her off?
looks insane! nice work
wow great work mate
97 C280 RIP 09-14-07 killed by a reckless rice rocket jetta (I just try and remember the good times)
***C43***
Clear Corners, ss oil filter, avantgrade grill, sport pedals, clk door pins
Luwin,DRM,Ashkan,
Thanks guys!..
Im not to keen on most rear bumpers for the 202,im happy with the updated one for the time being...but things are always changing
>>00 Black C43 w/Birch-Black. Immaculate. SOLD
>>94 Red C36, 6 speed .663 project
>>99 C43 Silver w/CLK55 package
>>99 Red S202 250TD.
>>89 Red 190E Evo1 kit, C36 engine w/.404
>>Old Turbo 2.3 History >>Old Turbo 2.3 Video
aheam, this should be tagged NSFWOriginally posted by omeyhomey
is it normal if i get turned on by an intake manifold
Thats hot! I know Local CHP would give me the death sentence if I get caught with something like that under the hood of my car
M111 never looked this good! although one thing that im surprised about is not seeing a gigantic chrome radiator to keep the cool ? ... your going to need it I know that since W202's already run higher temps then the other cars out there ... and im already looking into a radiator and a small seperate oil cooler.
and I really dont know about those rims, Milano's looked so clean and neat ... these look like they belong on a 240SX or a Silvia.
Hi,Originally posted by matt09
Just look at that turbo.....
BTW, I am very ignorant when it comes to engine internals, but shouldnt the manifold have some kind of pattern inside it so it sends air more efficiently to each cylinder? Arent you going to get more pressure on the last one compared to the first?
It depends alot on plenum size and plenum intake angle from what i gather,it is unlikely there would be more pressure at the far end,but if the plenum was to small you could expect other cylinders to starve nieghbouring ones thus causing pressure difference...
while on the tech descussion....im suprised PG didnt question the short runners
>>00 Black C43 w/Birch-Black. Immaculate. SOLD
>>94 Red C36, 6 speed .663 project
>>99 C43 Silver w/CLK55 package
>>99 Red S202 250TD.
>>89 Red 190E Evo1 kit, C36 engine w/.404
>>Old Turbo 2.3 History >>Old Turbo 2.3 Video
do master craftsmen work for like 5$/hr there? you must be like 20K into this motor....
Remolexi,
Yer the rims are a love hate thing,they werent quite what i had planned,but there growing on me slowly
As for the radiator,cooling doesnt seem that bad at all,the only time i heard the alarm go on the defi gauge was when i had just taken it for a rip round the block and it was sitting at idle for ~3 mins without the viscous fan installed!!!.
also our temps down here are usually between 10 - 25 degrees C all year round.
RacerXofFL,
NSFW??
and Aheam = omey?
thanks,
Paul
>>00 Black C43 w/Birch-Black. Immaculate. SOLD
>>94 Red C36, 6 speed .663 project
>>99 C43 Silver w/CLK55 package
>>99 Red S202 250TD.
>>89 Red 190E Evo1 kit, C36 engine w/.404
>>Old Turbo 2.3 History >>Old Turbo 2.3 Video
Not Suitable For Work : how we label porn and whatnot...Originally posted by 23K
RacerXofFL,
NSFW??
and Aheam = omey?
Now how bout the money aspect, would you like to be hosted on turbobenz.com?
lol i wish...usually $60-65NZD +12.5% GSTOriginally posted by RacerXofFL
do master craftsmen work for like 5$/hr there? you must be like 20K into this motor....
>>00 Black C43 w/Birch-Black. Immaculate. SOLD
>>94 Red C36, 6 speed .663 project
>>99 C43 Silver w/CLK55 package
>>99 Red S202 250TD.
>>89 Red 190E Evo1 kit, C36 engine w/.404
>>Old Turbo 2.3 History >>Old Turbo 2.3 Video
Ahh yipOriginally posted by RacerXofFL
Not Suitable For Work : how we label porn and whatnot...
Now how bout the money aspect, would you like to be hosted on turbobenz.com?
havent got any plans to have it hosted yet,will let you know if or when i do!
>>00 Black C43 w/Birch-Black. Immaculate. SOLD
>>94 Red C36, 6 speed .663 project
>>99 C43 Silver w/CLK55 package
>>99 Red S202 250TD.
>>89 Red 190E Evo1 kit, C36 engine w/.404
>>Old Turbo 2.3 History >>Old Turbo 2.3 Video
so u have had 3-4 tb mani's made, the intake, the built motor (2 sets of bad pistons ((added build time)) etc etc) between the bodykit, 2 sets of rims, and engine you have spent well over 20K and you have stoptechs on the way? (+4K more...)Originally posted by 23K
lol i wish...usually $60-65NZD +12.5% GST
I own turbobenz.com, Im offering to host it for you for free, your car is insaine...Originally posted by 23K
Ahh yip
havent got any plans to have it hosted yet,will let you know if or when i do!
cmon .... big huge radiator .... come on more chrome!!
you know you want one now and I know your gonna get one!
:bunny:
just look at his name - 23K means 23K he spent extra to make his 23T!Originally posted by RacerXofFL
so u have had 3-4 tb mani's made, the intake, the built motor (2 sets of bad pistons ((added build time)) etc etc) between the bodykit, 2 sets of rims, and engine you have spent well over 20K and you have stoptechs on the way? (+4K more...)
HahaOriginally posted by 23K
Hi,
It depends alot on plenum size and plenum intake angle from what i gather,it is unlikely there would be more pressure at the far end,but if the plenum was to small you could expect other cylinders to starve nieghbouring ones thus causing pressure difference...
while on the tech descussion....im suprised PG didnt question the short runners
Luckily you've got stand alone, and that really nice digital read of A-2-F to keep a close eye on the trial run in the event that its not the case!
As far as the looks, I like the SUBTLE anodized parts you have now, coupled with the blue silicon tubes etc, and I think with the Silver painted Kompressor spark plug cover it sets everything off great. I wouldn't touch anything, because it looks AMAZING as it is with a high lustre polish. If you were to clear blue anodize anything else, it would start to take your eyes away from the real prize and craftsmanship.
The rims - they are starting to grow on me as well. I'm a huge fan of the Milanos / Carlsson 2/5s look, but I love me some 3-piece wheels too! I'm hooked on the milanos simply because they took the effort to make a quality looking fake 3-piece wheel, as it's a 1-piece construction with rivets added. That Lumma bumper REALLY grew on me now that you have the C36 sides. I think the WALD rear bumper would set your car on FIRE! and remove/reinstall the chrome strips to black out the stock grille. It's amazing what a difference it makes when that sun-faded washed-out gray stock grille gets a nice coat of black enamel laid over it, and new chrome strips installed. trust me on this one!
RacerXofFL
Thanks,ill PM you when i get things running!
the project has cost alittle more than i was willing to spend...i dont really know how much now,i know alot has been wasted!.
>>00 Black C43 w/Birch-Black. Immaculate. SOLD
>>94 Red C36, 6 speed .663 project
>>99 C43 Silver w/CLK55 package
>>99 Red S202 250TD.
>>89 Red 190E Evo1 kit, C36 engine w/.404
>>Old Turbo 2.3 History >>Old Turbo 2.3 Video
Posting Permissions
Reply With Quote