Okay this is gonna be a quick cliff notes of what to do since its seriously simple and straight forward minus one step. Please forgive the picture quality they are from a camera phone. so the camber arm is the one in the top center of the arms in the rear obviously. you need two 19mms for the inside bolts a 17mm open ended wrench as well as a 17mm hex socket. for the side that attatches to the hub. remove the two bolts and remove the stock arm you get this
See the sleeve. This is the side that attaches to your hub. you need this sleeve or they will be loose and wont fit correctly
I used a wood block and rubber mallet to beat the sleeve out and into the new arms when done your new adjustable arms should look something like this right before install
install is easy put in place of the old arm you removed and bolt it down with a couple washers on either side so it slides real nice. adjust camber accordingly.
And here is the hub side ( the side you have to press that sleeve into)
Reply With Quote
