Year, model and engine plox. I have a subscription to EPC-online.
Here we go. The # on the pulley is 1470/a119/200 it is right at 93mm in diamater=the 92 mm sold. I just need to replace the inner bearing! Here is the info that i have. It is stamped on the rubber casing(not all #'s and letters can i read) INA GERMANY 3202-2r3-a__G0___. I can't make out the _'s. Also the inner shaft is stamped AH 13. Now for the diamentions. Inner is 14.85mm, .585in. Outer is 34.91mm,1.374in. I really don't see the sense in spending 60 bucks on a complete assembly when the bearing is all that is going bad. Any help is greatly welcome again.
Thanks
Year, model and engine plox. I have a subscription to EPC-online.
====================
VISIT THE W201nW202 YOUTUBE PAGE:
http://www.youtube.com/user/W201n202
1999 Mercedes C230 Kompressor / Rust Bucket, No MODS
2001 Mercedes E430 Sport
2009 Toyota Camry Hybrid
====================
Sorry it's a 96 c280 and it has the inline 6. Vin#wdbha28etf312140 . Hope this helps!
====================
VISIT THE W201nW202 YOUTUBE PAGE:
http://www.youtube.com/user/W201n202
1999 Mercedes C230 Kompressor / Rust Bucket, No MODS
2001 Mercedes E430 Sport
2009 Toyota Camry Hybrid
====================
Thank you for your time w202! I found a 92mm pulley on e-bay for 30 bucks shipped. Just waiting for delevery. Thank you again.
it should be a 3202 bearing any auto parts store should have these.